How do I adjust Hunter PGP up sprinkler head?

Insert the plastic key end of the Hunter wrench into the adjustment socket . While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360° turn of the wrench will increase the arc 90°. Adjust to any arc between 40° and 360°.

Align the nozzle in such a way to keep the spray on your lawn. If the spray head is creating too much mist, try closing the adjustment screw slightly. A clockwise turn or two should reduce the misting by lowering the water pressure inside the nozzle.

Similarly, what is the difference between red and blue Hunter nozzles? Both the Red and Blue nozzles will fit the PGP-Adj rotor head. The blue ones have different designations in GPM rather than just a size #. There are also Grey nozzles for lower angle patterns.

Then, why is my hunter sprinkler head not rotating?

When in operation, water turns a small turbine in the base of the sprinkler, which drives a series of gears that cause the head to rotate. The Hunter gear drive mechanism is sealed from dirt and debris. Generally, if cleaning the filter does not solve nonrotation then the sprinkler must be replaced.

How do you adjust Hunter pop up sprinklers?

To Increase the Arc

  1. Insert the plastic key end of the Hunter wrench into the adjustment socket .
  2. While holding the nozzle turret at the right stop, turn the wrench clockwise.
  3. Adjust to any arc between 40° and 360°.

What is a pop up sprinkler?

The main purpose of any garden sprinkler system is to provide uniform water to all plants. Sprinklers, called pop-ups, appear from hidden, underground receptacles to water your garden and lower back into the receptacle after the water is turned off.

Why does my sprinkler head leak?

There are two reasons why a sprinkler will leak water when the system is supposed to be off. The most common reason is called “Low Head Drainage”. If it is low head drainage, residual water will stop flowing after all the water has left the pipe.

Leave a Comment