How do I add a broken section in Solidworks?

Click Insert > Drawing View > Broken-out Section

To create a broken-out section:

  1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section.
  2. Sketch a profile.
  3. Set options in the Section View dialog box.
  4. Set options in the Broken-out Section PropertyManager.
  5. Click .

Furthermore, what is a broken out section view in SolidWorks? Brokenout Section. A brokenout section view cuts away a portion of an assembly in a drawing view to expose the inside. A brokenout section is part of an existing drawing view, not a separate view. A closed profile, usually a spline, defines the brokenout section.

Considering this, what is a broken out section?

A brokenout section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model. A closed profile, usually a spline, defines the brokenout section.

How do I change a broken out part in Solid Edge?

Select the brokenout section view profile to edit the brokenout section view. You can use the options on the BrokenOut Profile Selection command bar to modify the profile or extent depth of the brokenout section view. Select the brokenout section view profile to delete it using the Delete key.

What is Section drawing?

Section drawing. A ‘section drawing’, ‘section’ or ‘sectional drawing’ shows a view of a structure as though it had been sliced in half or cut along another imaginary plane. Plan drawings are in fact a type of section, but they cut through the building on a horizontal rather than vertical plane.

What are the different types of sectional views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What is revolved section?

Views, Continued Revolved sections Revolved sections are cross sections of an elongated form or object rotated toward the plane of projection to show its shape or contour. Drop a cutting plane perpendicular to the axis of the object and revolve the plane 90-degrees around a centerline and at a right angle to the axis.

How do you do a section view in SolidWorks?

To create a section view manually: Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager. Sketch a section line. Click to place the view.

What is a projected view in SolidWorks?

Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.

How do I create a detail view in SolidWorks?

To create a detail view: Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail. The Detail View PropertyManager appears and the Circle tool. is active. Sketch a circle. When the view is where you want it to be, click to place the view.

What is aligned section?

An aligned section view / cut is a view created from a cutting profile defined from non parallel planes. In order to include in a section certain angled elements, the cutting plane may be bent so as to pass through those features. The plane and feature are then imagined to be revolved into the original plane.

What is half section?

Half-Sections. A half-section is a view of an object showing one-half of the view in section, as in the drawing below. The diagonal lines on the section drawing are used to indicate the area that has been theoretically cut. These lines are called section lining or cross-hatching.

What is a breakout view?

A breakout view is one not in direct projection from the view containing the cutting profile. In other words, it is not positioned in agreement with the standard arrangement of views. A breakout view is often a partial section.

What is a conventional break?

Views, Continued Conventional breaks Use conventional breaks, often referred to as S-breaks, when elongated objects cannot fit on the drawing paper and you must figuratively remove a portion of the object.

How do you make an auxiliary view in SolidWorks?

To create an auxiliary view: Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View). Move the pointer until the view is where you want, then click to place the view.