Do top load washers have shipping bolts?

Top-loaders usually require you to wedge foam or cardboard between the drum and the case. For a front-loader, you’ll typically insert shipping bolts in the rear of the washer to secure the drum. If you no longer have the original locks, contact the manufacturer to purchase some.

Some brands of washing machines may have shipping bolts that are all the same length, and any shipping bolt can be used in any hole.

Similarly, where are shipping bolts on washer? The first are for shipping bolts attached to the rear of your washing machine. If the bolts are still there, remove them by using the wrench provided with your washer.

Accordingly, can I move a washing machine without the transit bolts?

Your washing machine cannot be moved without having its transit bolts installed because the vibrations on the road can easily damage the drum suspension mechanism of the appliance.

How do you transport a top loader washing machine?

Load your washer upright into a vehicle and secure.

  1. Step 1: Empty Your Washing Machine and Thoroughly Clean the Inside.
  2. Step 2: Turn Off the Water and Power Supplies, and Unplug.
  3. Step 3: Unfasten the Water Supply Hose and Detach the Valves.
  4. Step 4: Install Washing Machine Transit Bolts.

What happens if you leave transit bolts in a washing machine?

If you do not remove the transit bolts correctly you risk damage to your washing machine, in some cases this can be considerable, to the point where you can comprehensively wreck your shiny new washing machine. In other words, by not doing as instructed you risk major damage to your washing machine.

How do you secure a washing machine drum?

Tilt your top-loading washing machine over at an angle to allow any standing water to flow out of the drainage opening. Place a towel over your water supply hose ending and hold it in place with a rubber band. Lay the covered end of the hose inside the washing machine drum.

How do you remove transport bolts from a washing machine?

Removing the bolts only takes a few moments, then you can store the bolts for future moves. Locate the wrench supplied with the washing machine. Place the circular side of the wrench over the top of the bolt. Twist the braces counter-clockwise with the wrench to unscrew all of the bolts.

Are there shipping bolts on a dryer?

ANSWER Deborah, The Whirlpool Duet dryer would not require shipping bolts. Only a front load washer would have shipping bolts.

How many shipping bolts does a Samsung washer have?

What shipping bolt do I need to order for Samsung front load washer, model WF42H5200AW/A2? Answer Hello Meredith, You will need to order four DC97-14489A shipping bolts for the model provided.

Do I need to drain my washer before moving?

Before moving, shipping or storing, you’ll need to drain excess liquid from all parts of the machine. If the washer will be exposed to below freezing temperatures or moved during the winter, you’ll also want to properly winterize the washing machine using antifreeze.

How much does an average washing machine weigh?

200 pounds

How do I drain my washer before moving?

Detach the hoses from the machine, carefully moving the openings into a bucket or sink to drain away any leftover water. Then, remove the hoses from the switched off water valves. Remove the drain hose from the machine, and again, let any excess water drain away before removing it from the drain end.

Is it OK to transport a washing machine on its back?

Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it. When you install your washer in your new home, most likely you will have to level and balance it. Also, make sure you take out the shipping bolts before using the washer at your new location.

30 thoughts on “Do top load washers have shipping bolts?”

  1. Heya i’m for the first time here. I found this board and I in finding It really helpful& it helped me out a lot. I’m hoping to provide one thingagain and aid others like you helped me.

Leave a Comment